Bergey Wind Turbines and Towers
Event horizon Solar & Windpower.
Event Horizon Solar & Wind Inc.
616-389-3172
9am to 5pm eastern.

Providing Solar and Wind power for 12 years.
Back to Turbines Resources    Wind Power Basics Contact us

Bergey Windpower Turbines.

Bergey wind has been around for 30 years and have some of the finest off grid and grid connected wind turbines available today. The Bergey XL.1 is well suited for small off grid homes or cabins and is a top performer in low wind areas of the country with its high efficiency blades. The Bergey EXCEL is a large 10kw turbine capable of producing all the power needs of a typical residential home in moderate wind areas and the EXCEL comes in two configurations, one for battery charging in off grid homes and cabins or grid connected for those who want to power their home with renewable energy but stay connected to the grid for back up. We also carry affordable high quality monopole towers for the Bergey wind turbines made here in the USA shipped to your site. Please call or email with any questions or to order so we can help you decide which Bergey wind turbine and tower to choose.
Bergey EXCEL wind turbine.
Bergey EXCEL
7500 watt turbine.
Price: $22,650
120/240 volt DC version.
48 volt DC model also available.

Grid Tie Version.
 
10,000 watt turbine.
240vac 60hz
Price: $28,895.00
  • AWEA Rated Power: 8.9 kW at 11 m/s (24.6 mph)
  • AWEA Rated Sound Level: 42.9 dB(A)
  • AWEA Rated Annual Energy: 13,800 kWh at 5 m/s (11 mph)
  • Start-up Wind Speed: 3.4 m/s (7.5 mph)
  • Cut-in Wind Speed: 2.5 m/s (5 mph)
  • Nominal Power: 10 kW @ 12 m/s (27 mph)
  • Cut-Out Wind Speed: None
  • Furling Wind Speed: 15.6 m/s (35 mph)
  • Max. Design Wind Speed: 60 m/s (134 mph)
  • Type: 3 Blade Upwind
  • Rotor Diameter: 7 m (23 ft.)
  • Blade Pitch Control: None, Fixed Pitch
  • Overspeed Protection: AUTOFURL
  • Gearbox: None, Direct Drive
  • Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
  • Generator: Permanent Magnet Alternator
  • Output Form: 3 Phase AC, Variable Frequency (240 VAC, 1, 60 Hz or 220 VAC, 1, 50 Hz with Powersnyc II inverter.)

Remote Monitoring via Internet & Smart Phones available through APRS World
Description of EXCEL turbine
Note: We in most cases cannot sell the EXCEL out of state.

Bergey XL.1 wind turbine.
Bergey XL.1
1000 watt turbine.
Improved Model!
Price: $3,980
Includes Shipping to lower USA.
Add 3% for CC order.
  • Start-up Wind Speed: 3 m/s (6.7mph)
  • Cut-in Wind Speed: 2.5 m/s (5.6 mph)
  • Rated Wind Speed: 11 m/s (24.6 mph)
  • Rated Power: 1000 watts
  • Cut-Out Wind Speed: None
  • Furling Wind Speed: 13 m/s (29 mph)
  • Max. Design Wind Speed: 54 m/s (120 mph)
  • Type: 3 Blade Upwind
  • Rotor Diameter: 2.5 m (8.2 ft.)
  • Blade Pitch Control: None, Fixed Pitch
  • Overspeed Protection: AUTOFURL
  • Gearbox: None, Direct Drive
  • Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
  • Generator: Permanent Magnet Alternator
  • Output Form: 12 – 48 VDC Nominal.

Functional Features: Full length pultruded fiberglass blades, neodymium PMA, stainless steel mainframe, sealed enclosure for slip ring and bush assembly, extra marine grade coating on stator
(See towers below.)
 

Please call to order.
Seen a better price?
Contact us


EXCEL 10KW Towers from Bergey Wind.
Other sizes and configurations available.
Tower wiring kits available
.

guyed lattice tower
60ft Guyed Lattice Tower.
Price: $9,070
Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods.  Includes jackstand. Tower wiring is not included.
self supporting lattice tower
60ft Self supporting Lattice Tower.
Price: $9,500
Tower kits include Rohn SSV galvanized 6m (20 ft) lattice type tower sections and associated hardware, anchor bolts, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included.
 
self supporting tube tower
60ft Self Supporting tubular Tower.
Price: $11,750
Monopole tower kits are available from 60ft to 120ft
and include slip-jointed galvanized monopole
sections, anchor bolt and templates, climbing pegs, safety climbing
equipment, furling cable, furling winch mount bracket, turbine
attachment hardware, and grounding equipment kit. Furling winch
and hardware supplied by Bergey. Motorized tilt-up monopole available.

XL.1 Turbine Towers from Bergey Windpower.
Tower kits include galvanized 3 m (10 ft), 114 mm (4.5 in) diameter tubular tower sections and associated hardware, guy anchors, guy wires and associated hardware, and gin-pole. Not UPS shippable, must ship via truck. Tower electrical wiring is not included.
Bergey XL.1 tower
60ft XL Guyed Tower.
Price: $2,155
 
Guyed tower
80ft XL Guyed Tower.
Price: $2,600
turbine Guyed tower
100ft XL Guyed Tower.
Price: $3,100

XL.1 Monopole Tower From Event Horizon.
Affordable and high quality Tilt Up Monopole Tower!

Low cost Bergey monopole tower
50ft hinged (tilt up) Monopole Tower for XL.1
Includes Gin Pole, anchor bolts and template..
Price: $4895


Power Predictor

We are your Michigan Bergey Wind Power dealer and installer. Or, we can assist you to do your own installation. We have been in Michigan for 12 years and we know what works in our climate! Give us a call for excellent customer service and very affordable pricing.
Face Book.

Copyright 2013 Event Horizon Solar and Wind Inc. All rights reserved.